I brought it into the office and ran some measured pieces through. It has a meters/second setting and they were doing some mental math to come up with the higher number. And they did not blow as far as I thought that run was.
It was doing 350 fpm, but still that is really hauling a$$ From: ch...@wbmfg.com Sent: Friday, March 8, 2019 12:02 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] blowing fiber The guys say it was really doing about 600 fpm. So 6.81 MPH I have never seen a blowing machine go this fast. But the machine was originally designed for heavy large copper cable so it is vastly overkill for microfiber. From: Bill Prince Sent: Friday, March 8, 2019 11:38 AM To: af@af.afmug.com Subject: Re: [AFMUG] blowing fiber Wow. That's almost 6 MPH. Would like to see that in operation. bp <part15sbs{at}gmail{dot}com> On 3/8/2019 10:35 AM, ch...@wbmfg.com wrote: I got a junk Condux fiber blower in trade for plowing some cable. I bought new pads for the belt and machined them down to fit microfiber. I made new inserts to grip and seal on microfiber and microduct. We tried it out this morning. Blew 5000’ in 10 minutes. And that is using an 85 CFM 120 PSI compressor. I am liking my piece of junk that I fixed up. -------------------------------------------------------------------------------- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com