Is it still SNMP v1? --dan
On 8/13/2019 4:36 PM, Jim Bouse [Brazos WiFi] wrote: 6 or 8 months ago. Jim Bouse Owner - Brazos WiFi 979-985-5912 http://www.brazoswifi.com From: AF <af-boun...@af.afmug.com><mailto:af-boun...@af.afmug.com> On Behalf Of Dan Spitler Sent: Tuesday, August 13, 2019 11:21 AM To: AnimalFarm Microwave Users Group <af@af.afmug.com><mailto:af@af.afmug.com> Subject: Re: [AFMUG] Ubiquiti UFiber SNMP! When did that (finally) happen? On Mon, Aug 12, 2019 at 6:22 PM Jim Bouse [Brazos WiFi] <j...@brazoswifi.com<mailto:j...@brazoswifi.com>> wrote: We have been using it in production since July 30, 2018. Much testing before then. Nearly 100 subs on them so far and no issues in current firmware. Early beta FW had some memory leaks in the ONU but I don’t think we have had a single trouble call in months from a fiber customer. Overall, it does a good job of moving the bits downstream without a lot of fuss. We use UNMS to monitor. You can use SNMP instead if you want. ONU in Router mode can route a full gig. Bridge mode can do a gig (obviously). We are using the NanoG instead of the Loco because I like the screens and they come with gig POE adapters which we use. Jim Bouse Owner - Brazos WiFi 979-985-5912 http://www.brazoswifi.com From: AF <af-boun...@af.afmug.com<mailto:af-boun...@af.afmug.com>> On Behalf Of Jason McKemie Sent: Monday, August 12, 2019 8:08 PM To: AnimalFarm Microwave Users Group <Af@af.afmug.com<mailto:Af@af.afmug.com>> Subject: [AFMUG] Ubiquiti UFiber Has anyone out there had this in a production environment for any period of time? Good, bad, ugly? -- AF mailing list AF@af.afmug.com<mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
