If this is a unifi switch, you must use the controller. If it is an edgeswitch, you should be able to access.
Jim Sent via the Samsung Galaxy S8 Active, an AT&T 5G Evolution capable smartphone -------- Original message -------- From: ch...@wbmfg.com Date: 10/5/19 6:06 PM (GMT-06:00) To: af@af.afmug.com Subject: [AFMUG] Fw: Edgeswitch question From: ch...@wbmfg.com Sent: Saturday, October 5, 2019 4:29 PM To: ch...@wbmfg.com Subject: Re: [AFMUG] Edgeswitch question Trying to get to it via a unify download. From: ch...@wbmfg.com Sent: Saturday, October 5, 2019 4:27 PM To: ch...@wbmfg.com Subject: Re: [AFMUG] Edgeswitch question It finally showed up in the arp –a But it says “refused connection” when I try to browse to it. From: ch...@wbmfg.com Sent: Saturday, October 5, 2019 4:23 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Edgeswitch question Not seeing any IP with their MAC associated with it. From: Joe Novak Sent: Saturday, October 5, 2019 4:22 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Edgeswitch question That is probably the DHCP fallback IP, it may have pulled an address from your DHCP server. On Sat, Oct 5, 2019 at 5:17 PM <ch...@wbmfg.com> wrote: Replaced my flaky Nortel with a UBNT poe. Things are finally running clean. However, I can’t figure out how to get into the switch to config the POE. It say on the quick start guide that it has a default of 192.168.1.2 but nothing comes up on that address (yes, I did give my PC an address in that range) and arp –a does not show the mac of the switch itself. -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com ________________________________ -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
