Since you drill them out anyway, a regular bolt with a Nylok nut and a couple of washers with the angle iron Steve mentions would work pretty well. Would likely be stronger than the original rivet.
Regards, David Coudron From: AF <af-boun...@af.afmug.com> On Behalf Of Adam Moffett Sent: Monday, November 18, 2019 3:22 PM To: af@af.afmug.com Subject: Re: [AFMUG] Tripod on Roof Can an ordinary rivet rotate like the ones on those mounts do, or is that a special kind of rivet? On 11/18/2019 4:16 PM, Steve Jones wrote: theyre basically just angle iron, could precut them On Mon, Nov 18, 2019 at 3:03 PM Matt <matt.mailingli...@gmail.com<mailto:matt.mailingli...@gmail.com>> wrote: When removing a tripod from a roof we frequently drill the rivets out and leave the feet so to not cause leaks. Is it possible to reorder those rivets and feet so we can reuse the tripod rather then throwing them away? -- AF mailing list AF@af.afmug.com<mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
