I remember seeing a thread on the forums explaining more of this. Maybe this helps
https://community.cambiumnetworks.com/t5/PMP-Beta/Auto-contention-with-cluster-of-AP-s/m-p/104698 On Fri, Dec 13, 2019 at 9:07 AM Brandon Yuchasz <li...@gogebicrange.net> wrote: > Anyone running the new firmware on their 450 platform with auto contention > slots enabled in a colocation situation with FSK? > > > > I have read through the limited info on the cambium site and it appears > that it’s possible to do it but you still need to use the colocation > calculator and make sure your timing is not stepping on each other. > > > > For example right now my 450i AP is set to > > Channel Bandwidth > > *7* > > Max Range (mi) > > *14* > > Dowlink Data > > *78%* > > Contention slots > > *8* > > Frame length (ms) > > *5* > > > > My FSK 900 is set to > > Channel Bandwidth > > *8* > > Max Range (mi) > > *14* > > Downlink Data > > *75%* > > Contention Slots > > *4* > > Frame length (ms) > > *5* > > > > This checks out as Okay. > > > > Would I then just turn on the auto contention slots but leave all this > info the same and if so is it not going to run up past the amount of > contention slots I specified anyway to keep from screwing up the timing? If > so why bother with auto? > > > > > > Thanks > > Brandon > > > > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
