Harris Stratex microwave comes to mind. The T3 connection to the Cisco
needed to be Tx to Tx. And Rx to Rx.
On 5/21/2020 2:02 PM, Steve Jones wrote:
Ive never seen a tx port wanting the remote side to do the Tx, do you
have any reference devices?
On Thu, May 21, 2020 at 12:48 PM Adam Moffett <dmmoff...@gmail.com
<mailto:dmmoff...@gmail.com>> wrote:
Sometimes when a port is labeled "Tx" they mean "this port transmits".
Sometimes when a port is labeled "Tx" they mean "connect the transmit
from your other device here".
So sometimes you have equipment wanting cabling from Tx to Tx, and
other
times you want Tx to Rx. Is there some standard or rule of thumb for
when it's done one way or the other? Or is it just a toss up?
-Adam
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
