Yeah, I got your meaning, I just tend to use ONT generically but I guess it becomes a CPE inside or whatever.
I agree, those little grey boxes of yours make great little cross connect NID/housings. We use them all over for Ethernet RJ45 M/F junction housings. Including housing the simple BIDI LC couplers for outside plant to inside jumper cross connects. I need to order more of those empty housings if you have them. I’ll send you an email. From: AF <af-boun...@af.afmug.com> On Behalf Of ch...@wbmfg.com Sent: Thursday, June 4, 2020 10:10 AM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] Internal fiber I am not using ONTs in the classic sense. The 844G router is the ONT. Trying to attach as little to the outside of the house as possible. From: Sterling Jacobson Sent: Thursday, June 4, 2020 9:45 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Internal fiber I assume this is not new construction. In my limited use cases I’ve used armored jump cables from the outside mini-nid join box to the inside. Then loop it a couple of times, maybe behind the ONT even, secured to the wall or whatever, then just a bit is exposed to the plug. Or just went ahead and used a NID inside with the usual strain guards and even boots or mini conduit etc. New CenturyLink builds I’ve noticed have a flexible mini duct/conduit, then loop the jump cable coming out of that behind the ONT and connect it on the bottom so not much is exposed. From: AF <af-boun...@af.afmug.com<mailto:af-boun...@af.afmug.com>> On Behalf Of ch...@wbmfg.com<mailto:ch...@wbmfg.com> Sent: Thursday, June 4, 2020 9:24 AM To: af@af.afmug.com<mailto:af@af.afmug.com> Subject: [AFMUG] Internal fiber I am planning to run the fiber clear into the 844G router at each home. But in the past when we have done this, we have had issues with people not understanding that the fiber is a bit more delicate than cat5. Then there is the issue with the termination. You can get long jumpers and splice outside in a small enclosure. But replacing the end on the router is a bit more difficult. I have used unicams in the past, but with my new system I am looking for something better. I really need something a bit tougher than jumpers to route through the house. Anything like that exist? ________________________________ -- AF mailing list AF@af.afmug.com<mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
