444401UR43F050F
Graybar normally has these and then 100F version in stock.

On Fri, Jun 5, 2020 at 1:35 PM Jason McKemie <
j.mcke...@veloxinetbroadband.com> wrote:

> Do you have a part number for the Corning assembly?  I can't seem to
> locate it.
>
> On Thu, Jun 4, 2020 at 11:23 AM Chris Fabien <ch...@lakenetmi.com> wrote:
>
>> We use one of two options
>>
>> Corning RuggedDrop assembly, is a 5mm 1F tight buffered cable with SC/APC
>> on either end, outside rated in case you need to house wrap, we use this
>> from the NID to a baseboard jack. These are $25-35 range for 50-100ft
>> length.
>>
>> Fiberstore armored patch cables - 3mm with a blue PVC jacket, we use
>> these from the baseboard jack to the modem/ONU. Depending on the ONU you
>> may need a UPC to APC which is a custom item about a 1 month lead time.
>> We've also bought a similar cable from total cable solutions. About $5 for
>> the FS and only about $8.50 for the TCS.  We have also bought longer ones
>> of these to use from NID to the baseboard jack, in cases when it will not
>> be exposed to UV, like right into the crawl space and then up into the
>> living area.
>>
>> This is the baseboard jack we use:
>> http://www.ecablemart.com/terminal_box/2-fiber-86-type-ftth-terminal-box-p-119819.html
>>
>> Hope the helps
>> Chris
>>
>>
>>
>> On Thu, Jun 4, 2020 at 11:25 AM <ch...@wbmfg.com> wrote:
>>
>>> I am planning to run the fiber clear into the 844G router at each home.
>>> But in the past when we have done this, we have had issues with people
>>> not understanding that the fiber is a bit more delicate than cat5.  Then
>>> there is the issue with the termination.  You can get long jumpers and
>>> splice outside in a small enclosure.  But replacing the end on the router
>>> is a bit more difficult.  I have used unicams in the past, but with my new
>>> system I am looking for something better.
>>>
>>> I really need something a bit tougher than jumpers to route through the
>>> house.  Anything like that exist?
>>> --
>>> AF mailing list
>>> AF@af.afmug.com
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to