Strange, I have not seen that behavior as of yet. I really don't have a use for multiple users, so I haven't tried that. I did thermal glue a heatsink onto the top of the cloudkey though, since it gets a little hotter than I'm comfortable with.
On Tuesday, September 1, 2020, Nate Burke <n...@blastcomm.com> wrote: > Cloudkey Locks up and has to be rebooted about once a month. Live view > sometimes gets hosed. And searching through recordings is hit or miss. > Either doesn't find motion, or doesn't want to start playback when you find > the correct time. > > And I don't think (unless it's recently changed) you can have multiple > users use the App if they're not local to the NVR. > > > On 9/1/2020 3:27 PM, Jason McKemie wrote: > > What issues are you seeing with Unifi Protect? I set up a cloudkey gen2+ > with 8 of the G3 Flex cameras (~$67/ea.) a few months ago and am really > liking it. > > On Sat, Aug 29, 2020 at 1:13 PM Nate Burke <n...@blastcomm.com> wrote: > >> I haven't put any new cameras in for a couple years. Last one's I did >> were Unifi Protect. And although it is still running, the software >> seems to be just as buggy as it was all those years ago, and for the >> features, the cameras are pretty expensive. Are there any other low >> cost turnkey camera solutions out there? I could do like a Zoneminder >> or BlueIris, but I'm lazy in my old age and was looking for something >> more plug and play. I'm intrigued by the Blink or Nest cameras, but >> it looks like their only options are WIFI cameras, and I'd really like >> something POE. >> >> I'm looking to put 2-3 cameras at tower sites, so I can go back and look >> at recordings to see if anyone has been there, or pull them up to with >> live view to see what the weather is like at the site. >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
