Adam, We are using the pre-made cables. I don't have one in front of me. I know the have screws on them, but not sure if there are any exposed wires.
-- Best regards, Mark mailto:m...@mailmt.com Myakka Technologies, Inc. www.Myakka.com ------ Friday, October 9, 2020, 11:37:13 AM, you wrote: AM> Maybe you have a different model than we use or some such, but our guys AM> just double tap it. AM> Put two wires into the same hole on the block and tighten it down. AM> Boom. Done. It's under a little cover so nobody will see your sin. AM> On 10/9/2020 10:58 AM, Mark - Myakka Technologies wrote: >> We use Cyberpower BBU for our Fiber ONT's. It uses a custom plug that >> has the green terminal plugs on either end. I have a situation where >> I need to add a small mikrotik router to the system. I would like to >> tap the 12vdc from the BBU to power the mikrotik. I can do a DIY tap >> using a male and female screw connector. But was wondering is there >> was a more professional option out there. Did a few google searches >> with no good results. >> >> >> -- >> >> Thanks, >> Mark mailto:m...@mailmt.com >> >> Myakka Technologies, Inc. >> www.Myakka.com >> >> -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
