Yeah, we thermoformed ABS and got it too thin. They did not stand up well.
I was working on fiberglass radomes when we decided to kill the product
line.
-----Original Message-----
From: Nate Burke
Sent: Tuesday, November 23, 2021 11:05 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] Beehive Dishes and Aviat Radios
The dishes are the cheapest part of the whole project. Probably just
get new dishes since it requires extra pieces to adapt. I know we've
already had to replace the 2' beehive radomes a couple times.
On 11/23/2021 11:54 AM, Peter Kranz via AF wrote:
They do have a REMEC adaptor available.
Peter Kranz
www.UnwiredLtd.com
Desk: 510-868-1614 x100
Mobile: 510-207-0000
pkr...@unwiredltd.com
-----Original Message-----
From: AF <af-boun...@af.afmug.com> On Behalf Of Trey Scarborough
Sent: Tuesday, November 23, 2021 7:39 AM
To: af@af.afmug.com
Subject: Re: [AFMUG] Beehive Dishes and Aviat Radios
I believe avait has an adapter or radio that is compatible with remec
mount. I would email Ken and ask.
On 11/22/2021 5:09 PM, Nate Burke wrote:
Do the 2/3' Beehive dishes have the correct mount holes for an Aviat
Radio, or are they something special? I've only used the dishes with
REMEC mounts before.
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
