Used pulses are 3990402 and haven't moved in about 10 minutes.  I could
have sworn that was increasing last week...

radio 1-4 sync is 1 & syncpipe power is 1

Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Mon, Jan 3, 2022 at 2:10 AM Forrest Christian (List Account) <
li...@packetflux.com> wrote:

> The syncpipe draws so little power that that sensor is
> essentially useless.  Like the syncpipes use less than 10mA typically.
>
> There should be a counter which says "used pulses".   Is it incrementing
> once per second, and only once per second?   If it's not then the
> syncinjector isn't receiving sync.
>
> On the binary or boolean tab, there should also be 4 power rows and 4
> tripped rows and 4 sync rows.   make sure the rows for sync are 1 (one).
>
>
>
> On Sun, Jan 2, 2022 at 11:11 AM Josh Luthman <j...@imaginenetworksllc.com>
> wrote:
>
>> I have a syncinjector with sitemonitor.
>>
>> The underlying issue is the site monitor isn't "producing" sync as
>> notified via SNMP.  I think it's a "SyncPipe" that goes into the
>> SyncInjector.  SiteMonitor is telling me "SiteMonitor4ChGigabitPoE".
>>
>> I just noticed the SyncpipeDraw(mA) is 0.  Does that for sure work?  I
>> don't have any history or anything, but does it make sense the Syncpipe
>> took a dump?
>>
>> Josh Luthman
>> 24/7 Help Desk: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>>
>> On Fri, Dec 31, 2021 at 3:14 PM Forrest Christian (List Account) <
>> li...@packetflux.com> wrote:
>>
>>> What do you have the pipe plugged into?
>>>
>>> You mention it's counting pulses.  Does this mean it's into a managed
>>> injector? (Rackinjector or syncinjector with sitemonitor)
>>>
>>> If so you should be able to turn the unit off with the injector and turn
>>> it back on.
>>>
>>> If this is sync over power, you may want to try also cycling the radio
>>> remotely to make sure it loses power.   Occasionally we will find a port
>>> which has lost its ability to turn off power.  In canopy sync this will
>>> also prevent sync from being injected.
>>>
>>> If that all seems OK,  you should double check the sync is still enabled
>>> on the syncinjector port.
>>>
>>> And, some older radios will lose their ability to receive power port
>>> sync.
>>>
>>> On Fri, Dec 31, 2021, 5:05 AM Josh Luthman <j...@imaginenetworksllc.com>
>>> wrote:
>>>
>>>> It is counting pulses.
>>>>
>>>> Can I reboot the syncpipe remotely?
>>>>
>>>> On Thu, Dec 30, 2021, 10:38 PM Steve Jones <thatoneguyst...@gmail.com>
>>>> wrote:
>>>>
>>>>> I switch to generate sync, powercycle the aps and the syncpipe, then
>>>>> swict back to cmm and it tends to fix it, assuming the pipe says is
>>>>> generating pulses
>>>>>
>>>>> On Thu, Dec 30, 2021, 2:24 PM Josh Luthman <
>>>>> j...@imaginenetworksllc.com> wrote:
>>>>>
>>>>>> I've had this unit up for about 7 years.  No problems.  Yesterday it
>>>>>> started complaining I'm not generating sync.
>>>>>>
>>>>>> I've got 7 satellites used, 10 satellites viewable, a list of the
>>>>>> satellites, the coordinates, the time, etc.  It hasn't generated sync for
>>>>>> almost 24 hours now.
>>>>>>
>>>>>> What can I do?
>>>>>>
>>>>>> Josh Luthman
>>>>>> 24/7 Help Desk: 937-552-2340
>>>>>> Direct: 937-552-2343
>>>>>> 1100 Wayne St
>>>>>> Suite 1337
>>>>>> Troy, OH 45373
>>>>>> --
>>>>>> AF mailing list
>>>>>> AF@af.afmug.com
>>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>>>>
>>>>> --
>>>>> AF mailing list
>>>>> AF@af.afmug.com
>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>>>
>>>> --
>>>> AF mailing list
>>>> AF@af.afmug.com
>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>>
>>> --
>>> AF mailing list
>>> AF@af.afmug.com
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>
>
> --
> - Forrest
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to