I would open it up and clean any corrosion on the PCB around the ethernet
port with some alcohol.
-----Original Message-----
From: Nate Burke
Sent: Tuesday, April 5, 2022 10:05 AM
To: Animal Farm
Subject: [AFMUG] Airfiber11 Ethernet Repair
I have an AF11 radio that took water in the Cat5 and corroded the RJ45
port. The radio still powers via POE and RF is just fine, but Ethernet
is only working at 100mb/s I'm guessing because of the poor pin
contacts. Does anyone repair these? Since Radios are up to $1000, a
few hundred for repair is worth it, and it's small enough that shipping
cost is manageable.
I think UBNT used to have some sort of repair program for the AF24's,
but I didn't know if that was still in existence.
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
