That makes me wonder if the other guys’ “10gig” surge suppressor is going to break what I plug into it.
I’ll tell you, compared to any other ethernet surge suppressor the 10gig model they sell has almost nothing in it. If it works, it’s got to be the most minimal protection imaginable. This is probably another point in favor of separate power+fiber for outdoor equipment. -Adam From: ch...@go-mtc.com <ch...@go-mtc.com> Sent: Thursday, August 17, 2023 11:14 PM To: dmmoff...@gmail.com; 'AnimalFarm Microwave Users Group' <af@af.afmug.com> Subject: Re: [AFMUG] Question for Chuck, and anyone wise who wants to add their 0.02... I have not. It is nearly impossible for a surge suppressor to pass full CAT6 standards. The jacks are not even able to pass with no components. From: dmmoff...@gmail.com <mailto:dmmoff...@gmail.com> Sent: Thursday, August 17, 2023 8:27 PM To: 'AnimalFarm Microwave Users Group' Cc: ch...@go-mtc.com <mailto:ch...@go-mtc.com> Subject: RE: [AFMUG] Question for Chuck, and anyone wise who wants to add their 0.02... Have you played with multi-gig ethernet? A certain “brand T” has a model of 10gig surge suppressor and it has very few components compared to their prior models. I was wondering if 10G is too sensitive to put more components in the line. -Adam From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On Behalf Of Chuck McCown via AF Sent: Thursday, August 17, 2023 9:21 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com <mailto:af@af.afmug.com> > Cc: ch...@go-mtc.com <mailto:ch...@go-mtc.com> Subject: Re: [AFMUG] Question for Chuck, and anyone wise who wants to add their 0.02... All CAT6 in our product line are 100% GDT. Anything that says GIGE has solid state and GDT. I would recommend CAT6 for everything. From: Forrest Christian (List Account) Sent: Thursday, August 17, 2023 6:22 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] Question for Chuck, and anyone wise who wants to add their 0.02... Which of the MTC CAT6 surge suppressors that fit in the APC racks are recommended for general use? I see a Gas discharge and semiconductor diode version on the website. Guessing the GDT version is more robust and less likely to cause errors at the expense of reaction time. _____ -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
