In all seriousness I've never looked for a DIN Rail inverter until just now. https://www.meanwell-web.com/content/files/pdfs/productPdfs/MW/NTS-400P/NTS- 400P-spec.pdf
That one has decent temperature range. Input from 10-16V which should accommodate charging and discharging voltages on a 12V system. It's panel mount, but Meanwell sells L-Brackets to convert some of their panel mount things to DIN Rail. Or just attach it somewhere above or below the DIN Rail. Apparently it needs a 25CFM cooling fan added to get the full 400W capacity in the full temp range.....but if you're talking 20W load then that's obviously not an issue. -Adam -----Original Message----- From: AF <af-boun...@af.afmug.com> On Behalf Of Matt Sent: Tuesday, October 17, 2023 1:37 PM To: af@af.afmug.com Subject: [AFMUG] 12 Volt DC to 120 VAC Does anyone know of a small device to convert 12 Volt DC to 120 VAC at 10 - 20 watts and is DIN mounted? I know there are tons that plug into cigarette plug but was wanting something I could DIN or similar mount. -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com