I know what I would do, but you can do whatever feels right.

-----Original Message-----
From: AF <af-boun...@af.afmug.com> On Behalf Of Chuck McCown via AF
Sent: Tuesday, February 20, 2024 6:18 PM
To: 'AnimalFarm Microwave Users Group' <af@af.afmug.com>
Cc: ch...@go-mtc.com
Subject: Re: [AFMUG] Wood Pole Mount

But on the nut, curve in or out?... ;-)

-----Original Message-----
From: dmmoff...@gmail.com
Sent: Tuesday, February 20, 2024 4:04 PM
To: 'AnimalFarm Microwave Users Group'
Subject: Re: [AFMUG] Wood Pole Mount

If you're putting that rod through a pole, spend an extra $2 on a square
curve washer for the back side:
https://www.linemen-tools.com/Square_Curved_Washer_2_1_2_x_2_1_2_x_3_16_J682
2_p/h-j6822.htm

What you're describing might be a conduit standoff bracket.  That same
linemen-tools.com site may have something similar if you dig through their
catalog.

-Adam


-----Original Message-----
From: AF <af-boun...@af.afmug.com> On Behalf Of Matt
Sent: Tuesday, February 20, 2024 2:54 PM
To: af@af.afmug.com
Subject: Re: [AFMUG] Wood Pole Mount

I like this but pricey but still will likely go with it if I find nothing
else.
https://www.commscope.com/product-type/structural-support-tools-accessories/
structural-support-equipment/structural-mounts/pipe-mounts/itemdb365w/

I saw one on a pole a few weeks back that had a banding bracket with a hose
clamp that went around the steel pipe and a long bolt that went through the
wood pole. Been looking online for something like that with no luck. Its
like above with bolt through pole but instead of clamp kit it had a banding
bracket and hose clamp to attach to the metal pipe.

Have used j-arms for this before but they're flimsy and have had them blow
over in the wind. Not wanting that to happen in this application.


On Tue, Feb 20, 2024 at 9:29 AM Matt <matt.mailingli...@gmail.com> wrote:
>
> I need to mount a small steel pole to a wood light pole. The kits I
> see online are like $300 range and way more robust than I need. Just
> mounting a small yagi a few feet above the top of the wood pole. Does
> anyone know of anything?

--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com


-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com 


-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com


-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to