You will need a BMS unless the battery has one built in. If it does, a
regular telco rectifier will do the job.
-----Original Message-----
From: Mark - Myakka Technologies via AF
Sent: Friday, April 5, 2024 10:58 AM
To: af@af.afmug.com
Cc: Mark - Myakka Technologies
Subject: [AFMUG] LiFePO4 question again
I'm finding hard to pass up just getting a 100ah 48v LiFePO4 rackmount
battery. I have a new fiber system that will need a maximum of 3kw once it
is maxed out over the years. This seems like an easy and clean battery
solution.
Question is how do I power the system from the AC side on a daily basis and
keep the battery charged. The normal rectifier way seems to be a bit
lacking in LiFePO4 support.
I can get a EG4 Chargeverter 48V 100A Battery Charger that looks like it
would do the job. Not sure if this thing is designed to run 24/7 at load or
if it is designed for intermittent loads to just charge batteries.
Thoughts?
--
Thanks,
Mark mailto:m...@mailmt.com
Myakka Communications
www.Myakka.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com