That might work. I wonder if the pipe might spin in that mount since it
only has a clamp on 1 side, and the flat plate on the other.
On 4/8/2024 4:07 PM, Ken Hohhof wrote:
Sitepro1 has a tieback mount called PUCK. Something like that?
---- Original Message ----
From: "Nate Burke" <n...@blastcomm.com>
Sent: 4/8/2024 3:48:57 PM
To: "AnimalFarm Microwave Users Group" <af@af.afmug.com>
Subject: [AFMUG] 45 Degree Pipe to Pipe Clamp
Has anyone seen a 45 degree pipe to pipe clamp. Similar to this, but at
45 instead of 90.
https://valmont-sitepro1-cdn.s3.amazonaws.com/spec-sheet/SSCK%20(Assembly).pdf
I'm looking to put a vertical pipe on a lattice tower, but the
horizontal mounts are 20' apart at the spot I need. There is a
horizontal and angled cross member close together I could mount to, if I
could find a 45 clamp. I just need a pipe to get a 2' Dish mounted.
I'm trying to avoid going around the 9" diameter tower leg just for a 2'
dish.
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
