Yeah, you sure cannot pump this air into a closed box. We open up our big roll up doors a few feet each morning when they turn on all the swampers. At night we leave one on to pre chill the building. It vents back through the two units that are off as well as the paint booth.
From: Dan P via AF Sent: Thursday, July 11, 2024 6:54 PM To: AnimalFarm Microwave Users Group Cc: Dan P Subject: Re: [AFMUG] OT Evap cooling 103 outside this after the wetwall, 20ish thousand cfm on this guy. Only gotcha is must have good exhaust or it gets too humid inside -------------------------------------------------------------------------------- From: AF <af-boun...@af.afmug.com> on behalf of ch...@go-mtc.com <ch...@go-mtc.com> Sent: Thursday, July 11, 2024 3:16:55 PM To: af@af.afmug.com <af@af.afmug.com> Subject: [AFMUG] OT Evap cooling It is 100 outside and 75 inside. 22,400 square feet of metal shop building. All due to swamp cooling. 16% humidity outdoors 75% indoors. All for the cost of spinning a blower and pumping a tiny bit of water. -------------------------------------------------------------------------------- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com