The 2004 doesn't fit the Mikrotik 48vdc power supply.  They're two totally
different form factors.  Sure you could crack the case open and make it
work with some solder, but I figured we wanted parts that would fit.

On Mon, Jun 23, 2025 at 12:01 PM Mike Hammett <[email protected]> wrote:

> I guess it depends on which 2004. The product page says it does work with
> one of them. We are using that one successfully on -48.
>
>
>
>
> --
> Mike Hammett
>
> ----- Original Message -----
> From: "Josh Luthman" <[email protected]>
> To: "AnimalFarm Microwave Users Group" <[email protected]>
> Sent: Monday, June 23, 2025 10:55:35 AM
> Subject: Re: [AFMUG] Mikrotik on -48VDC
>
>
>
> That 48vdc power supply doesn't work on at least the 2004...I don't know
> about the other CCR. It does on the 1009 (which was my first suggestion,
> but keep in mind that's an older TILE router)
>
>
> On Mon, Jun 23, 2025 at 11:54 AM Adam Moffett < [email protected] >
> wrote:
>
>
>
>
>
> Yeah, I just found that on their website. I didn't know they sold this.
>
>
> From: AF < [email protected] > on behalf of castarritt <
> [email protected] >
> Sent: Monday, June 23, 2025 11:32 AM
> To: AnimalFarm Microwave Users Group < [email protected] >
> Subject: Re: [AFMUG] Mikrotik on -48VDC
>
>
> The PW48V-12V85W power board can take -48vdc. Many of the CCR series can
> accept that PSU.
>
>
> On Mon, Jun 23, 2025 at 10:25 AM Adam Moffett < [email protected] >
> wrote:
>
>
>
>
>
> Are there are any Mikrotik models that definitely work with positive
> ground? I know I can use an isolated converter, but it would make me
> happier if I don't need one.
>
>
> -Adam
>
> --
> AF mailing list
> [email protected]
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
> --
> AF mailing list
> [email protected]
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
> --
> AF mailing list
> [email protected]
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
>
> --
> AF mailing list
> [email protected]
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to