Yeah, I haven't figured out how to make that happen yet. I really wanted to have a right click menu but that doesn't seem to be a real possibility in most browsers.
Steve mentioned the sitemonitor manager option which does allow the right click copy, but that requires installing software. On Sep 24, 2014 6:17 PM, "Sam Lambie via Af" <af@afmug.com> wrote: > Thanks. How can I be lazy and copy that pop up to copy the OID? > > Sam Lambie > Wireless Internet Technician > www.taosnet.com > 575.758.7598 > > On Sep 24, 2014, at 3:01 PM, "Forrest Christian \(List Account\) via Af" < > af@afmug.com> wrote: > > That's the right way to do it. > > If you go into the web interface and into the analog tab and put your > mouse pointer over the value for the appropriate dc input, the oid will be > shown in the lower right corner of your screen. > On Sep 24, 2014 2:43 PM, "Sam Lambie via Af" <af@afmug.com> wrote: > >> I want to monitor grid power by placing a wall wort into PWR 2 on the >> site monitor. Then plug the wall wort (sp?) into the Surge side of the UPS. >> >> What OID would I use to see if there is power or NOT for SNMP queries? Or >> is there a better way to go about this? >> >> thanks >> >> Sam >> >> -- >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com <http://www.newmex.com> >> >