I take it you haven't assembled one of these before... At least watch their demonstration video to know what's going on.
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: "Ty Featherling via Af" <af@afmug.com> To: af@afmug.com Sent: Tuesday, October 28, 2014 1:13:28 PM Subject: Re: [AFMUG] PTP450 + Epmp100 dish _ Mtow Ok okay so that circle with the 4 holes around it at the top maybe? If so that's not so bad. -Ty On Tue, Oct 28, 2014 at 1:11 PM, Mathew Howard via Af < af@afmug.com > wrote: They are setup for an ePMP radio to attach to the plate on the non-mount side, it's just not designed for a 450... looks like it worked fine to do it that way though. From: Af [ af-boun...@afmug.com ] on behalf of Ty Featherling via Af [ af@afmug.com ] Sent: Tuesday, October 28, 2014 1:01 PM To: af@afmug.com Subject: Re: [AFMUG] PTP450 + Epmp100 dish _ Mtow Is that mount serious? I mean it may be convenient to mount on the other side but c'mon. Any no place for the radio? Could have at least made a nice spot on there for a radio on one of those plates so that you can put the radio on the non-mount side. Weird. -Ty On Tue, Oct 28, 2014 at 12:56 PM, Gino Villarini via Af < af@afmug.com > wrote: <blockquote> Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr </blockquote>