I haven't spent a lot of time on the interface yet, but what I've seen is a good first step. % Frame Utilization. Okay, now within that say 73% utilization, how much is in, how much is out, how much is MCS0 how much is MCS15, how much is spent retransmitting things you already sent, etc.?
Basically give me the tools to determine why the system isn't performing as expected instead of just me saying, "This radio sucks." ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: "Ben Royer via Af" <af@afmug.com> To: af@afmug.com Sent: Thursday, October 30, 2014 1:42:09 PM Subject: Re: [AFMUG] Feature Request of all radio manufacturers: Radio utilization or duty cycle meters ePMP has a lot of what you’re asking for, 320 line had some too. Thank you, Ben Royer, Operations Supervisor Royell Communications, Inc. 217-965-3699 www.royell.net From: Mike Hammett via Af Sent: Thursday, October 30, 2014 1:22 PM To: Animal Farm Subject: [AFMUG] Feature Request of all radio manufacturers: Radio utilization or duty cycle meters I want to see utilization or duty cycle meters. Tell me how busy the AP is so I know how much more can fit... and break down into different categories why it's busy. TX, Rx, retransmit, overhead, MCS 15, MCS 0, which stations are using what percent, etc. I'd say that knowing how busy the radio is is more important than knowing how many bits are flowing through it. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com
