Yep loaded back 11.2 and now am able to ping the master and port is not flapping anymore….guess am going to have to make the same changes to the slave
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Craig Schmaderer via Af Sent: Wednesday, November 19, 2014 10:54 AM To: af@afmug.com Subject: Re: [AFMUG] v13.2 - ptp230 Oh side note, all the 230ptp we have are the 5.4ghz flavor, links range from a few miles to 10 miles, we have tested and seen this behavior on all different lengths and different links. We tested like 3 links one night with guys on both ends to make sure we saw the same behavior, all links fail to register, you normal get some registration range error. I have tested like 3 or 4 different version past 11.2, I gaveup about 6 months ago on this, and we are jest sticking to 11.2, all new links are 450ptp or licensed. Craig R. Schmaderer CEO | Skywave Wireless, Inc. Ph: 402-372-1975 | Fax: 402-372-1058 Direct: 402-372-1052 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Craig Schmaderer via Af Sent: Wednesday, November 19, 2014 9:50 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] v13.2 - ptp230 Sounds like whatever you do don’t upgrade, just a side note, we run all of our 230ptp on 11.2. That is the last stable firmware that I have seen for this product. I have worked with cambium on the no registration problem and gotten no where, its like they gave up on this product. Everything I have tested since 11.2 has registration problems, either they won’t link or they take 10, 20 or whatever they feel like minutes to link. So we just stay on 11.2. I have never seen any issues for us on 11.2. YMMV Craig R. Schmaderer CEO | Skywave Wireless, Inc. Ph: 402-372-1975 | Fax: 402-372-1058 Direct: 402-372-1052 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Mano via Af Sent: Wednesday, November 19, 2014 9:37 AM To: 'af@afmug.com' Subject: Re: [AFMUG] v13.2 - ptp230 Looks like my port is flapping on my switch From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Mano via Af Sent: Wednesday, November 19, 2014 10:32 AM To: 'af@afmug.com' Subject: Re: [AFMUG] v13.2 - ptp230 Just tried it on ptp 230 5.7Ghz and both sides never came back up…updated the slave side first never registered back so I upgraded the master side can’t even ping that anymore From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mathieu via Af Sent: Wednesday, November 19, 2014 10:16 AM To: af@afmug.com<mailto:af@afmug.com> Subject: [AFMUG] v13.2 - ptp230 Hi, Has anyone tried v13.2 on a ptp230 5.4GHz link ? This link goes down regularly since the upgrade, and I'm seeing events like this : CPU Utilization (Cur/Max): (100%/100%) Total Time : 1975809 us TASK TASK % RT Tot TASK Tot S T A C K Task PC NAME PRI RT MAX Cyc Preempt CtxSw (Sz/Cur%/Max%)OV Status Addr ------------------------------------------------------------------------------------- SYNC 4 ( 0%) 834 6725 0 9 (12284/ 2%/30%) PendEvFlgGrp 0x67ed4 WDOG 5 ( 0%) 51 243 0 6 (12284/ 2%/ 8%) Ready 0xa29b1c LEDT 6 ( 0%) 72 347 0 6 (12284/ 2%/ 9%) Ready 0x67ed4 DIAG 10 ( 0%) 0 0 0 0 (12284/ 2%/10%) PendEvFlgGrp 0x67ed4 APMT 11 ( 0%) 0 0 0 0 (12284/ 2%/ 9%) PendEvFlgGrp 0x67ed4 trap 14 ( 0%) 0 0 0 0 (12284/ 2%/32%) PendEvFlgGrp 0x67ed4 SESS 15 ( 0%) 0 0 0 0 (12284/ 2%/47%) PendEvFlgGrp 0x67ed4 SOCK 16 ( 0%) 235 757 4 8 (12284/ 6%/26%) Suspend 0x67ed4 COMM 17 ( 0%) 67 67 0 1 (12284/ 2%/29%) PendEvFlgGrp 0x67ed4 VLAN 20 ( 0%) 0 0 0 0 (12284/ 2%/10%) PendEvFlgGrp 0x11 APPT 22 ( 0%) 0 0 0 0 (12284/ 2%/ 9%) PendEvFlgGrp 0x67ed4 ctic 23 ( 0%) 534 3666 8 28 (12284/ 2%/ 9%) Ready 0x67ed4 Inet 24 ( 0%) 0 0 0 0 (12284/ 2%/24%) Suspend 0x67ed4 BDMT 27 ( 0%) 51 96 0 2 (12284/ 2%/ 9%) PendEvFlgGrp 0x67ed4 BDQT 28 ( 0%) 474 2146 0 20 (12284/ 2%/12%) PendEvFlgGrp 0x67ed4 AUTH 31 ( 0%) 0 0 0 0 (12284/ 3%/11%) PendEvFlgGrp 0x67ed4 SNMP 32 ( 0%) 0 0 0 0 (12284/ 3%/40%) Suspend 0x67ed4 teln 34 ( 0%) 66 213 0 4 (12284/ 6%/25%) Suspend 0x67ed4 TEL1 35 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x67ed4 TEL2 36 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x67ed4 TEL3 37 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x67ed4 TEL4 38 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x67ed4 FTPs 39 ( 0%) 53 199 0 4 (12284/ 7%/27%) Suspend 0x67ed4 ROOT 46 ( 0%) 0 0 0 0 (12284/ 2%/40%) Suspend 0x67ed4 UPDM 47 ( 0%) 0 0 0 0 (12284/ 2%/11%) PendEvFlgGrp 0x67ed4 UPDT 48 ( 0%) 0 0 0 0 (12284/ 2%/ 9%) PendEvFlgGrp 0x67ed4 HTTP 50 ( 0%) 53 206 0 4 (12284/ 7%/27%) Suspend 0x67ed4 PROX 51 ( 0%) 278 633 0 4 (12284/ 7%/27%) Suspend 0x67ed4 TFT0 53 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) PendQ 0x67ed4 nvrm 55 ( 0%) 0 0 0 0 (12284/ 2%/ 9%) PendEvFlgGrp 0x67ed4 PING 56 ( 0%) 0 0 0 0 (12284/ 2%/ 8%) Suspend 0x67ed4 LLDT 57 ( 0%) 185 350 0 2 (12284/ 2%/ 9%) PendEvFlgGrp 0x67ed4 STAT 60 (16%) 19251 341146 6 24 ( 8192/ 3%/14%) Ready 0x67ed4 IDLE 61 (80%) 49944 1619015 68 68 ( 8192/523272%/14%) Ready 0x67cb4 PRI PC ID or ******System Startup****** System Reset Exception -- Watchdog Reset Software Version : CANOPY 13.2 BHUL-DES Board Type : P11 Device Setting : 5.4GHz SISO OFDM - Backhaul - Timing Slave - 0a-00-3e-b0-48-35 FPGA Version : 082914 FPGA Features : DES, Sched; 01/01/2011 : 00:00:02 UTC : : Bridge/OS Core : FatalError() NULL exception reset 01/01/2011 : 00:00:02 UTC : Stack Dump information: Current context Task: IDLE Current Stack: 3% Max Stack: 14% then ******System Startup****** System Reset Exception -- Watchdog Reset Software Version : CANOPY 13.2 BHUL-DES Board Type : P11 Device Setting : 5.4GHz SISO OFDM - Backhaul - Timing Slave - 0a-00-3e-b0-48-35 FPGA Version : 082914 FPGA Features : DES, Sched; 11/19/2014 : 15:06:07 UTC : : Bridge/OS Core : Time Set
