I don't have any spare Gigabit SI's, but let me know if you need a normal (eg, non-gigabit) one (which will work fine).
Josh On Sat, Nov 29, 2014 at 4:55 PM, Josh Luthman via Af <af@afmug.com> wrote: > So I just got back...fuse popped on that SyncInjector. Not sure why. > There was a Ubnt Beam on it - the cable was moved to the POE injector and > fuse replaced. SyncInjector is working as expected right now. > > Sure hoping Forrest can do next day shipping on Monday =) > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Sat, Nov 29, 2014 at 3:39 PM, Forrest Christian (List Account) via Af < > af@afmug.com> wrote: > >> See http://tickets.packetflux.com/kb/faq.php?id=2 >> >> 6 blinks = power missing/too low. >> >> And yes, you need a syncpipe. >> >> -forrest >> >> On Fri, Nov 28, 2014 at 6:46 PM, Josh Luthman via Af <af@afmug.com> >> wrote: >> >>> Here's a video, not sure what the blinking means? >>> >>> https://www.youtube.com/watch?v=dME8A-H_590 >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Fri, Nov 28, 2014 at 8:39 PM, Josh Luthman via Af <af@afmug.com> >>> wrote: >>> >>>> *rb2011 with ports 2/3/4/5 set to hardware switch (ether2 master, 3/4/5 >>>> slave). Ports 6/7/8/9 are hardware switch (ether6 master, 7/8/9 slave). >>>> *From the rb2011 it goes to the Ethernet half of the SyncInjector. >>>> *From the POE half of the SyncInjector it goes to WB gigeapc HV surge >>>> suppressors and then to the ePMP radios. >>>> >>>> Two of the ePMP radios are powered up and running gige. Neither are >>>> receiving CMM sync (top of the ePMP says "Not receiving GPS sync"). The >>>> remaining 6 APs aren't even powering up/linking up. Any ideas before I >>>> start swapping parts? Is it OK to have the surge between SyncInjectors and >>>> ePMP? >>>> >>>> On top of all of this the SiteMonitor isn't talking to the POE injector >>>> or the two Gig SyncInjectors. I have them all daisy chained and verified >>>> they're snapped in place. The POE injector is powering Ubnt radios just >>>> fine. >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>> >>> >> >