Does not work for me. I tried it that way, could only get one of the four tabs
to lock. The tolerances are way tight on this unit. It took all my might to get
the feedhorn in the hole of the dish (putting the horn in first), and it will
not bottom out like it is supposed to so the tabs can reach their holes. This
is a major disappointment for me.
On Monday, December 8, 2014 11:09 PM, Mathew Howard via Af <af@afmug.com>
wrote:
#yiv8998471224 P {margin-top:0;margin-bottom:0;}I've only put one together so
far, but the feedhorn went in fine... it took a bit of pressure, but nowhere
near breaking anything.
From: Af [af-boun...@afmug.com] on behalf of George Skorup (Cyber Broadcasting)
via Af [af@afmug.com]
Sent: Monday, December 08, 2014 10:58 PM
To: af@afmug.com
Subject: Re: [AFMUG] Force 110 assembly - anyone else having problems?
That's what I thought at first, I'ma gonna break somethin...
I stuck the feedhorn in first. Put the back bracket and mount on. Put the four
allen-head screw in hand tight. Put some pressure on the front of the feedhorn
and push on the back of the bracket at each of the four locking tab points.
They click in place. Tighten the four allen screws. Put the front reflector on,
mount the radio, etc. Fairly easy after the first one.
On 12/8/2014 10:35 PM, Alan West via Af wrote:
Just got my four pack in. Opened the box, all nicely packed. Started my first
assembly. Got the bracket put on the dish. No problems. Now I get to the
feedhorn push in. Yah right. This thing will not just "click" in place like the
video shows. There is no way this feed horn I have will push far enough for the
tabs to go into the holes for them....I would probably break something.
Seriously, I put the Force 100 together faster, and you know how bad it is...I
hope the other three are not like this or they will go back to the supplier.
