Sure. No different than your SSID method really. Just a trick to reach
those subnets.

-Ty

On Wed, Dec 10, 2014 at 9:16 AM, Vlad Sedov via Af <af@afmug.com> wrote:

>  we use PPPoE, but that might still work..
>
>
> Vlad
>
>
> On 12/10/2014 9:11 AM, That One Guy via Af wrote:
>
> we have IP aliases on the WAN side for all the different radio systems
> with the interface still set to DHCP, this way we only need one ESSID and
> DHCP Pool on the inside. the techs can plug the radio into it to manage the
> radio until its provisioned, then still access it via the pop router after
> its been provisioned
>
> On Wed, Dec 10, 2014 at 9:07 AM, Vlad Sedov via Af <af@afmug.com> wrote:
>
>> This is the product of boredom, some dremel bits, and a large collection
>> of old power tools..
>>
>> The switch controls DC polarity, so UBNT and Cambium radios can be
>> powered from the same jack.
>> The router is set up with several SSIDs, and each one has its own DHCP
>> pool. That way, you can attach to the proper SSID with your mobile device,
>> and it will put you on the same subnet as the radio. Yet another SSID is
>> used basically as a home wifi router, so if the radio is moved to the WAN
>> port, the rig can be used to get online.
>> This is a very crude prototype, but it works great, and battery lasts a
>> very long time. Going to migrate it all into a belt pouch.
>> Being able to charge battery packs on their original charging dock is
>> also pretty handy.
>>
>>
>> peace
>>
>> Vlad
>>
>>
>> ---
>> This email is free from viruses and malware because avast! Antivirus
>> protection is active.
>> http://www.avast.com
>>
>
>
>
>  --
>  All parts should go together without forcing. You must remember that the
> parts you are reassembling were disassembled by you. Therefore, if you
> can't get them together again, there must be a reason. By all means, do not
> use a hammer. -- IBM maintenance manual, 1925
>
>
>
>
> ------------------------------
>    <http://www.avast.com/>
>
> This email is free from viruses and malware because avast! Antivirus
> <http://www.avast.com/> protection is active.
>
>

Reply via email to