As the Canopy proxy requires both the AP and the CPE being Canopy. MT supports anything using MAC telnet on that layer 2 segment. That would be other APs or CPE or routers or whatever else your box is configured as. Canopy is restricted to that AP and its CPE.
I believe I've seen people dig up the Linux package MT uses for this feature for including it in other people's products. Just add mac telnet to ePMP? ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: "Josh Luthman via Af" <af@afmug.com> To: af@afmug.com Sent: Thursday, December 18, 2014 10:08:45 AM Subject: Re: [AFMUG] ePMP proxy Equally so IME but that's also depending on both sides being MT. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 18, 2014 11:03 AM, "Mike Hammett via Af" < af@afmug.com > wrote: With Mikrotik you can mac-telnet or mac-winbox to anything on that layer 2 segment. That sounds more useful than this proxy. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: "Vlad Sedov via Af" < af@afmug.com > To: af@afmug.com Sent: Thursday, December 18, 2014 9:11:55 AM Subject: Re: [AFMUG] ePMP proxy One thing that makes it so bullet-proof on Canopy, is the internal network between the AP and the SMs (169.254.101.x) which is what makes the proxy so smooth. With ePMP and UBNT, you're still at the mercy of having the right IP address set in the SM before you can manage it (even when connecting from the AP). We sorely miss this feature in ePMP, and it makes NMS mapping a major headache.. We don't pre-map SMs before they go out into the field, so with ePMPs, I have to create a static ARP entry for the 192.168.0.2 address in the closest Mikrotik router, and use the Tik proxy to get into the SM.. Change IP, delete ARP, rinse, repeat. Click-through is a cruel joke without the proxy. I really, really hope it gets properly implemented. Vlad On 12/18/2014 7:18 AM, Josh Luthman via Af wrote: <blockquote> How are you doing it with Ubnt? Can't the same be done with epmp? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 18, 2014 8:06 AM, "Mark Radabaugh via Af" < af@afmug.com > wrote: <blockquote> For our install method proxy access (or some means of remote access to a minimally configured CPE) is a must have. The installers do NOT have to get out a computer or otherwise access the device. Power it up, point it at the tower, listen for signal, call the office for a signal quality check and go. Everything regarding CPE programming can be done remotely. This can be done with Ubnt as well by SSH to the AP's and then to the CPE but it's not as clean as Canopy. No way at all that I know of with ePMP. Mark <blockquote> On Dec 17, 2014, at 11:04 PM, Steve D via Af < af@afmug.com > wrote: Use it all the time. Between it and installer color code field techs can't FUBAR an install. When our larger networks were vlan'd years ago that made the process super safe. One of the "best features" of the canopy platform in my book. It annoys me working on 802.11 crap when I see a tech has typo'd something like an IP or vlan. On Dec 17, 2014 7:30 PM, "Bill Prince via Af" < af@afmug.com > wrote: <blockquote> Me too. I don't know how many times I've used it, but it's more than I have finger to count on. -- bp <part {dash} 15 {at} SkylineBroadbandService {dot} com> On 12/17/2014 7:08 PM, George Skorup (Cyber Broadcasting) via Af wrote: <blockquote> No, rather just have it. On 12/17/2014 9:07 PM, Josh Luthman via Af wrote: <blockquote> Rather have it and not need it then need it and not have it. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 17, 2014 9:55 PM, "Mike Hammett via Af" < af@afmug.com > wrote: <blockquote> I used it a couple times on my Canopy gear, but it was never a show-stopper to not have it. This brings me to a new post... ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: "George Skorup (Cyber Broadcasting) via Af" < af@afmug.com > To: af@afmug.com Sent: Wednesday, December 17, 2014 8:30:14 PM Subject: [AFMUG] ePMP proxy OK Cambium ePMP dudes and chicks, I am disappointed. I thought you guys had Canopy-like SM "click-thru" access, aka LUID proxy. But this is not the case on 2.3.3. All you give me is a URL with the IP of the SM. Informational helpful, yes, operationally helpful, no. I'm guessing you need an RF private network like exists on Canopy to make this work. Please do it. </blockquote> </blockquote> </blockquote> </blockquote> </blockquote> </blockquote> This email has been checked for viruses by Avast antivirus software. www.avast.com </blockquote>
