I can tell you that with the APC solutions, you wont have the universality that you have with WB. this product line alone went through alot of revisions and tweaks until it met the industry need, With APC you wont get that. Youll get what you get and thats that. WB For Life yo!
On Thu, Dec 18, 2014 at 10:46 AM, Sean Heskett via Af <af@afmug.com> wrote: > > Yup > > There is a "data sheet" link at the bottom of the product page and it > lists most (but not all) devices its compatible with. > > http://wbmfg.com/specs///Application%20Chart%20Sheet1.pdf > > > Sean > > > On Thursday, December 18, 2014, Ryan Mano via Af <af@afmug.com> wrote: > >> Would this also work with ptp600’s? >> >> >> >> Right now I use the LPU sliver box surge >> >> >> >> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Jeremy via Af >> *Sent:* Thursday, December 18, 2014 11:38 AM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] APC Protectnet >> >> >> >> Yeah, I just checked and the ones I ended up with were the PDIGTR. >> Probably won't do anyone any good >> http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=PDIGTR >> >> >> >> On Thu, Dec 18, 2014 at 9:31 AM, Josh Luthman via Af <af@afmug.com> >> wrote: >> >> OK, just checking. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Dec 18, 2014 11:29 AM, "Chuck McCown via Af" <af@afmug.com> wrote: >> >> Nope, you can get them for cheap on Amazon. >> >> >> >> *From:* Josh Luthman via Af >> >> *Sent:* Thursday, December 18, 2014 9:28 AM >> >> *To:* af@afmug.com >> >> *Subject:* Re: [AFMUG] APC Protectnet >> >> >> >> I've got the Din but I'm gathering you don't make a 19 rack unit? >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Dec 18, 2014 11:23 AM, "Chuck McCown via Af" <af@afmug.com> wrote: >> >> Thanks! >> >> >> >> *From:* Jeremy via Af >> >> *Sent:* Thursday, December 18, 2014 9:17 AM >> >> *To:* af@afmug.com >> >> *Subject:* Re: [AFMUG] APC Protectnet >> >> >> >> I love the WB GigE-APC-POE! Here is the APC rack mount... >> >> On Dec 18, 2014 9:13 AM, "Josh Luthman via Af" <af@afmug.com> wrote: >> >> You make a rack mount one? What's the part number? I'm not seeing it on >> the website. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Dec 18, 2014 11:10 AM, "Chuck McCown via Af" <af@afmug.com> wrote: >> >> My rack actually comes from APC and gets modified a bit. >> >> >> >> *From:* Josh Luthman via Af >> >> *Sent:* Thursday, December 18, 2014 9:02 AM >> >> *To:* af@afmug.com >> >> *Subject:* Re: [AFMUG] APC Protectnet >> >> >> >> Is the APC rack thing grounded like yours, just bigger and rack mountable? >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Dec 18, 2014 10:56 AM, "Chuck McCown via Af" <af@afmug.com> wrote: >> >> And they fit the APC rack too! >> >> >> >> *From:* Mike Hammett via Af >> >> *Sent:* Thursday, December 18, 2014 8:50 AM >> >> *To:* af@afmug.com >> >> *Subject:* Re: [AFMUG] APC Protectnet >> >> >> >> Talk to WB Manufacturing. Their surge suppressors are kind of the group's >> standard. >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> >> ------------------------------ >> >> *From: *"Ryan Mano via Af" <af@afmug.com> >> *To: *"af@afmug.com" <af@afmug.com> >> *Sent: *Thursday, December 18, 2014 9:49:04 AM >> *Subject: *[AFMUG] APC Protectnet >> >> Has anyone replaced their moto surges with these? >> >> >> http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=PNETR6&tab=models >> >> >> >> I use a lot of the packetflux syncinjectors at my towers and it’s a >> recommend surge that packetflux says to use instead of the moto surges >> >> >> >> I have a ptp 230 that has tons of crc errors that just happened recently >> and am wondering if this would help it…we checked the cables and the moto >> surge and all is find so am thinking it maybe due to this >> >> >> >> Anyone else tried out these surges? >> >> >> >> >> >> >> >> -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
