Beeing an early adopter is hard with every gear. You need luck to get a working device/firmware. We did one test tower which does not work due to dfs issues, than we had a bad sm we used for testing. Now they work quite well for us.
The web interface needs a fast pc to be usable. It is slow but works. The epmp needs still a lot of work but you see progress. Von: Tyler Treat via Af Gesendet: Montag, 29. Dezember 2014 19:59 An: Tyler Treat via Af Amen brother, if I was on the roof for three hours with one of those radios I would be jumping off the roof myself. Sent from my iPhone Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 > On Dec 29, 2014, at 1:42 PM, Ryan Goldberg via Af <af@afmug.com> wrote: > > I was a relatively early adopter. Not believing my techs, I went to the > field one day, to “show them what’s up” – no technology can do battle with me! > > After 3 hours I pitched that f*cker off the roof and issued a cease a desist. > > We’re sitting on 20ish units waiting for everyone else to burn the bugs out > now. > > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Kurt Fankhauser via Af > Sent: Monday, December 29, 2014 12:39 PM > To: af@afmug.com > Subject: [AFMUG] EPMP insanity! > > I can't take it anymore, I'm going back to UBNT for non-FSK/450 stuff. I can > no longer deal with the slow and horrible EPMP interface. I thought it would > get better as the firmware matured but its not getting any better, Just > loaded the latest firmware 2.3.3 and its still slower than a turtle going in > the wrong direction. For crying out loud the old Tranzeo interface is faster > than this! Chrome, and IE 11 it doesn't matter it literally takes me 30 > minutes to config one of these radios. By the time you upgrade the firmware > and "try" to upload a template to one. (never does want to take a backup > config is always erroring out) I can't afford to be sitting at the bench all > day fiddling with these radios. You can't even type text in the fields that > already have characters in them without getting some weird outcome. Everytime > i go to deal with one of these radios i always end up with obscenities coming > out of my mouth and I even have a hole punched in a wall in the shop cause i > got so frustrated with one a few weeks back. > > Maybe Bitlomat will come out with third party firmware for these and save us > all.... > > > > > Kurt Fankhauser > Wavelinc Communications > P.O. Box 126 > Bucyrus, OH 44820 > http://www.wavelinc.com > tel. 419-562-6405 > fax. 419-617-0110