I cant find any option that allows it uner Monitor Network . I think you may be right that it only works in WIFI mode not TDD but I cant find where to turn it back into WIFI mode now that it is in TDD? There is Ubnt 2.4 and Cambium 2.4 on this same tower but they are on 2457 and 2442. The EPMP is on 2412. Very rural area so I doubt there is that much noise. I can turn the AP into SPectrum analizer mode and see. I'll report back
----- Original Message ----- From: "Josh Luthman" <j...@imaginenetworksllc.com> To: af@afmug.com Sent: Thursday, January 22, 2015 5:39:34 PM Subject: Re: [AFMUG] Epmp newbee Monitor wireless might have a scan what you're after. I think that's only compatible (ie TDD OR wifi not both) networks seen. Uplink issue, noise and all that basic rf stuff? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 22, 2015 6:07 PM, "Craig House" < cr...@totalhighspeed.net > wrote: I've been using cambium/Motorola FSK products now for 10 years but the EPMP product has a few things that I can't quite get to work The main one that concerns me is that I'm using an integrated SM and at any distance from the tower I can make it connect as long as I know the SSID. But what is the trick to making it show available SS IDs to connect to sort of like the scan available access points feature in ubiquity? The second question is that even a very close distances and was very good signals like -53 I have difficulty getting good uplink capacity the quality seems to be reasonable 90% or above but the capacity varies from 15% to 45% most of the time and it's obvious in the speed test that the uplink is not doing what it should What am I doing wrong photo is attached of what I'm talking about in the second question Sent from my iPhone
