No welding. Put channel bars on either side of the 4” bar perpendicularly. User some all-thread to compress them against the bar. Just use the bar clamps for the channel bad.
Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of TJ Trout Sent: Friday, January 30, 2015 2:11 PM To: af@afmug.com Subject: Re: [AFMUG] Mounting to 4" Square tubing Like welding you mean rory? On Fri, Jan 30, 2015 at 1:09 PM, That One Guy <thatoneguyst...@gmail.com<mailto:thatoneguyst...@gmail.com>> wrote: upc1 and upc2 from sitepro On Fri, Jan 30, 2015 at 2:56 PM, Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>> wrote: Use channel bar to create a frame around the tubing and then attach the pole to that. Rory From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of TJ Trout Sent: Friday, January 30, 2015 1:52 PM To: af@afmug.com<mailto:af@afmug.com> Subject: [AFMUG] Mounting to 4" Square tubing Any ideas on mounting sectors and backhauls to 4" sqare tubing? -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
