When doing PTP600 sync, yes, a tower must be all masters or all slaves. Any given tower is either listening or talking. You also have to do the math in linkplanner to get the sync settings for your specific PTP600 topology.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of David Sent: Wednesday, February 4, 2015 5:37 PM To: af@afmug.com Subject: Re: [AFMUG] multiple ptp600 setup I think he is trying to say there would be issues if one is a master and the other is a slave on the tower. Its a common rule here once a slave always a slave or master do not mix and match or issues could ensue. On 02/04/2015 11:33 AM, Josh Luthman wrote: Not sure what your problems would be. Unless they're getting at the whole which one is my master thing. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Feb 4, 2015 10:16 AM, "Ryan Mano" <rm...@corp.mdswireless.com> wrote: Not sure I run 1 ptp 600 at 5.8 and 2x ptp230’s at 5.8 no problems so far but I just need more bandwidth on the other links From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman Sent: Wednesday, February 4, 2015 12:14 PM To: af@afmug.com Subject: Re: [AFMUG] multiple ptp600 setup That's so wrong... Maybe it's a problem on the same frequency? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Feb 4, 2015 10:11 AM, "Ryan Mano" <rm...@corp.mdswireless.com> wrote: I heard that running more than 1 ptp600 masters at 1 tower is not possible because it can cause problems It has to be setup as slave master and slave or master slave master on the 1 tower is this true? thanks
