I use these http://www.winfordeng.com/products/dinm12-15.php
The 12RC are skinny (like 3/4") On Fri, Feb 20, 2015 at 11:21 AM, That One Guy <thatoneguyst...@gmail.com> wrote: > We have been using these to adapt things: > http://www.winfordeng.com/products/dinm01.php > [image: Inline image 1] > I screw a hoseclamp to them for mounting power supplies and other loose > things > > The things I dont like about them is they only accept screws through the > front, and rammy installers shatter them in the winter. Theyre also pretty > small so mounting anything with weight is suspect. > > I dont want 5 dollar clips, those I can get on per needed basis, I just > want to find something a little bit heftier with the ability to run screws > in from the other side to have on hand all the time > > > > > -- > All parts should go together without forcing. You must remember that the > parts you are reassembling were disassembled by you. Therefore, if you > can't get them together again, there must be a reason. By all means, do not > use a hammer. -- IBM maintenance manual, 1925 >