This is reminiscent of that aggressive bald cambium sales rep, insulting
customers and making huge promises, I wonder what he does now.

On Mon, Feb 23, 2015 at 4:36 AM, Gino Villarini <g...@aeronetpr.com> wrote:

>   can’t compare LTE vs PMP450 protocol, 2 different beasts.  Even under
> same RF conditions (same Tx power, same Rx sens) LTE will have better NLOS
> coverage.
>
>
>
>  Gino A. Villarini
> President
> Aeronet Wireless Broadband Corp.
> www.aeronetpr.com
> @aeronetpr
>
>
>
>   From: Jason McKemie <j.mcke...@veloxinetbroadband.com>
> Reply-To: "af@afmug.com" <af@afmug.com>
> Date: Monday, February 23, 2015 at 4:01 AM
> To: "af@afmug.com" <af@afmug.com>
> Subject: Re: [AFMUG] Grail or Gauntlet? ...or Maybe Just "Powerpointware"?
>
>  I think "RF levels" is the key phrase here - a bit of wordsmithing :)
>
> On Monday, February 23, 2015, Josh Reynolds <j...@spitwspots.com> wrote:
>
>>  Sensitivity does not change the power level of the received signal.
>>
>> --
>> Josh Reynolds
>> CIO, SPITwSPOTSwww.spitwspots.com
>>
>> On 02/22/2015 08:42 PM, Patrick Leary wrote:
>>
>> ...also, seriously. You any like it's even possible to compute a link
>> budget without accounting for sensitivity, MIMO scheme etc. Thinking dBm
>> and dBi are the only numbers in the equation has me wondering how
>> experienced you are Adam. You do realize don't you it's impossible to
>> understand link budget without knowing a whole host of things besides the
>> output power and antenna gain?
>> On Feb 22, 2015 10:37 PM, "Adam Moffett" <dmmoff...@gmail.com> wrote:
>>
>>>  I read that quote before Patrick, and I am forced to wonder if that
>>> individual was in the United States and running at the correct (legal)
>>> power level.  And I wonder if he was comparing the naked 10dbi SM to a
>>> 15dbi wimax CPE.  You could definitely get 10db more by turning up the tx
>>> power all the way and using a bigger antenna, and maybe you can do some
>>> electronic magic to make a little more out of the signal you're getting,
>>> but there's no magic that makes more db's appear.  If both systems started
>>> with the legal +40dbm then how does one end up with 10db more at the CPE?
>>>
>>> I'm a skeptic by nature.
>>>
>>>  Testing back to back between Cambium and Telrad products on the same
>>> tower at the same azimuth, we found an average of 10dB better RF levels
>>> with Telrad’s equipment."
>>>
>>>
>>>
>>


-- 
All parts should go together without forcing. You must remember that the
parts you are reassembling were disassembled by you. Therefore, if you
can't get them together again, there must be a reason. By all means, do not
use a hammer. -- IBM maintenance manual, 1925

Reply via email to