Actually there are two different devices in work. The 12 port syncinjectors is mechanically two four port injector side by side so it's the same width but thicker, but with a total of 12 ports. Approximately 6" wide, 3" thick, and 4" deep. The circuit design is done, we're just dealing with enclosure design issues related to a combination of the larger enclosure and having two circuit boards. Hopefully 30 days.
The second one is a rackmount modular injector. It's going to be fall when that one is released assuming no major unexpected issues. I wasn't at AF so I didn't get to see the prototype, but I talked to him in STL about it. It sounds like it'll be something we'll want to put at most sites. Swappable modules for different PoE types with built-in DC-DC converters that'll take in whatever you have, +24, +48, -48, etc. Kinda like a CTM box but modular. On 4/5/2015 3:18 PM, Paul McCall wrote: That is a good option. I was referring to the device that Forrest showed a “prototype” of at Animal Farm a couple months ago *From:* Af [mailto:[email protected] <[email protected]>] *On Behalf Of *Craig House *Sent:* Sunday, April 05, 2015 1:56 PM *To:* [email protected] *Subject:* Re: [AFMUG] 12 Port SyncInjiector Paul We started using the syncbox 12 for sync on timing. It seems to be a great option if you dont mind running the timing cables as well as cat5 Craig ------------------------------ *From: *"Paul McCall" <[email protected]> *To: *[email protected] *Sent: *Sunday, April 5, 2015 12:35:14 PM *Subject: *[AFMUG] 12 Port SyncInjiector Forrest, Is this is a product yet? Paul Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com [email protected]
