Sounds like adding a “min modulation” setting would do the trick. From: Shayne Lebrun Sent: Monday, May 04, 2015 6:31 PM To: af@afmug.com Subject: Re: [AFMUG] AirFiber drop ethernet on minimum modulation
That link has what is, for us at least, a usable workaround. Set the max modulation to the modulation you generally get. Turn off rate adapt. Then turn on track radio link. If the signal drops enough that the modulation drops at all, down goes the data Ethernet port. Of course, this is an all-or-nothing approach; maybe it usually runs in 6x, but 4x and even 2x would still be enough, but it might get us through until we get a more granular solution. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mike Hammett Sent: Monday, May 4, 2015 7:08 PM To: af@afmug.com Subject: Re: [AFMUG] AirFiber drop ethernet on minimum modulation Not as long as I thought. http://community.ubnt.com/t5/airFiber-Beta/AF24-disable-modulations/m-p/671001/highlight/true#M899 ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com -------------------------------------------------------------------------------- From: "Mike Hammett" <af...@ics-il.net> To: af@afmug.com Sent: Monday, May 4, 2015 6:03:48 PM Subject: Re: [AFMUG] AirFiber drop ethernet on minimum modulation I did. A long time ago. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com -------------------------------------------------------------------------------- From: "Chuck Macenski" <ch...@macenski.com> To: af@afmug.com Sent: Monday, May 4, 2015 1:04:50 PM Subject: Re: [AFMUG] AirFiber drop ethernet on minimum modulation Hi, We ARE doing that for a near term release - we plan to use the capacity numbers and it works across all airFiber units. If you want feature additions for airFiber, I suggest you post them on the airFiber forum on the Ubiquiti website. Chuck On Mon, May 4, 2015 at 12:49 PM, Shayne Lebrun <sleb...@muskoka.com> wrote: Well, here’s what Ubiquiti said when I submitted it as a feature request: "Currently, we don't have any plans in doing any addition in the devices now.” From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman Sent: Tuesday, April 28, 2015 10:05 AM To: af@afmug.com Subject: Re: [AFMUG] AirFiber drop ethernet on minimum modulation Right after Beam DFS LOL Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Apr 28, 2015 10:00 AM, "Mike Hammett" <af...@ics-il.net> wrote: They said it would, but it has been a while since they said it. Year or two? ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com -------------------------------------------------------------------------------- From: "Shayne Lebrun" <sleb...@muskoka.com> To: af@afmug.com Sent: Tuesday, April 28, 2015 8:51:05 AM Subject: [AFMUG] AirFiber drop ethernet on minimum modulation Does the AirFiber have, or will it have, an option to drop the data Ethernet port if RF modulation drops below defined level, and reenable it once the RF modulation gets back above said threshold and stays there for an appropriate length of time?