If they're the same as the one I have, they aren't keyed, but there also aren't any holes that line up at 45 degrees... I can't see any way to change it to slant without drilling new holes.
On Mon, May 11, 2015 at 4:48 PM, George Skorup (Cyber Broadcasting) < geo...@cbcast.com> wrote: > If they aren't keyed like the damn UBNT dishes! And I bet UBNT wants you > to use the conversion kit so the weep holes at the front of the reflector > stay on the bottom. I don't like that design at all. > > > On 5/11/2015 4:45 PM, Chuck McCown wrote: > >> Loosen up the feed tube so that you can rotate the N connectors the a 45 >> degree orientation rather than the V&H. >> >> -----Original Message----- From: Randy Cosby >> Sent: Monday, May 11, 2015 3:44 PM >> To: af@afmug.com >> Subject: [AFMUG] ARC wireless eXsite dish >> >> I got a couple ARC Wireless eXsite 30dBi dishes to try out on a Airfiber >> 5X link. Their site (http://www.antennas.com/dish-antennas-2/) claims >> the polarization is "Dual Linear – V and H (can be adjusted for Dual >> Slant +/- 45°)" Since UBNT's dual-slant dishes are not widely available >> yet, I decided to give a pair of these a try. >> >> No instructions were included on how to change them to dual slant. >> Anyone tried a pair of these? There are some tiny allen-wrench type >> screws that look like might do the trick, but I don't want to mess >> something up trying. I can of course use the radios without >> dual-slant, but would like to give it a try. >> >> Thanks! >> >> >
