Well, a little more information might be helpful. You say links, does that mean these are PTP links? Same antenna gain as the other links that have lower noise floors? How big an antenna? Could this link have more gain, or be pointed at a distant noise source?
What kind of radios? Bottom line, there is one way to eliminate a bad radio as the cause, and that is to replace it. You could also try turning off your other radios briefly during a maintenance window to see if they are bleeding into this one. From: Jon Langeler Sent: Thursday, July 02, 2015 8:35 PM To: af@afmug.com Subject: Re: [AFMUG] high noise floor ideas? Haha. No but it looks like one device that decided to take the whole band and add a 10db noise floor. we are used to -90 then a bunch of -60 signals in 20Mhz and at most 80Mhz chunks. Just thought if I was missing something Sent from my iPhone On Jul 2, 2015, at 9:12 PM, Mike Hammett <af...@ics-il.net> wrote: Where Jon's at there are more trees than people. Shouldn't be a lot of 5 GHz there. ;-) ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ------------------------------------------------------------------------------ From: "Gino Villarini" <ginovi...@gmail.com> To: af@afmug.com Sent: Thursday, July 2, 2015 8:04:41 PM Subject: Re: [AFMUG] high noise floor ideas? -80 high noise floor????? On Thu, Jul 2, 2015 at 8:59 PM, Jon Langeler <jon-ispli...@michwave.net> wrote: We have a link with an unusually high noise floor of -80 across the board at a very remote location. Other ends of the links and other links at the tower are seeing -90 noise floor through the band which is expected. Any idea why we would see the higher noise floor on a link end that's across the whole 5Ghz band that should be very low? Sent from my iPhone
