Crap, how about you include the link, Ty... Dumbass... http://forum.netonix.com/viewtopic.php?f=17&t=237
-Ty On Jul 6, 2015 8:39 PM, "Ty Featherling" <[email protected]> wrote: > Check here Josh. If you can't get it worked out I will help further. > > -Ty > On Jul 6, 2015 7:50 PM, "Josh Corson" <[email protected]> wrote: > >> We have an abundance of ports ATM, so using a simple VLAN seems to be our >> easiest bet, and helps us if we hit over a gig through the APs or BHs. Our >> router is the RB1100 as well, so many ports to go around. >> >> Ty, I couldn't find the unofficial guide section, can you point me in the >> right direction, taking screenshots would work as well, thanks. >> >> On Mon, Jul 6, 2015 at 7:18 PM TJ Trout <[email protected]> wrote: >> >>> why use as a mid span and waste so many ports when you can trunk them >>> all back to a single port right? is this because your exceeding 1gig? >>> On Jul 6, 2015 4:14 PM, "Ty Featherling" <[email protected]> >>> wrote: >>> >>>> I've done just what you are saying with mine and I can screenshot the >>>> VLAN config for you if you like. Also you can find an example in the forums >>>> under the unofficial guide. >>>> >>>> -Ty >>>> On Jul 6, 2015 4:21 PM, "Josh Corson" <[email protected]> wrote: >>>> >>>>> Hi all, >>>>> >>>>> Maybe a dumb question but we have not had much experience with VLANs >>>>> (at all) and are reaching out to get some pointers on how to set up a VLAN >>>>> on our WS-24 for Mimosa BH's. We planned on using the first four ports >>>>> that >>>>> have 48VH to power backhauls, but do not want them switched necessarily. >>>>> The goal is to pair ports (I.e. Port 1 for POE to backhaul and a latter >>>>> port like 12 for the LAN to plug up to our router. Basically just >>>>> bypassing >>>>> a power brick and using the Netonix for Poe. Anything special about this >>>>> setup? Any help here would be appreciated. >>>>> >>>>> Josh >>>>> >>>>
