We've got one around -72 i believe, now with 2.4.2 the screen isn't always showing the status of the SM. I mean, i can monitor the screen, obviously it's still connected, but it reports "scanning" or "not associated". That's with almost all of them. Most of ours are in the 60s.
I did see some re-regging with our -72 unit...I may try 2.4.2 and see if it's more stable. ----- Original Message ----- From: Wireless Admin To: af@afmug.com Sent: Sunday, July 12, 2015 7:10 AM Subject: Re: [AFMUG] Cambium ePMP1000 Software Ver 2.4.3 The most obvious problem is a one mile link with LOS. RSSI is 52 in both directions with no obvious interference problems. The worst interferers are 76dBm on the SM side and 66dBm on the AP side. With 2.4.2 the link is stable. Load 2.4.3 and it disassociates with the AP frequently. Steve ------------------------------------------------------------------------------ From: Af [mailto:af-boun...@afmug.com] On Behalf Of CBB - Jay Fuller Sent: Saturday, July 11, 2015 10:04 PM To: af@afmug.com Subject: Re: [AFMUG] Cambium ePMP1000 Software Ver 2.4.3 running a mix of both here, not really seeing anything that screams at me. what, exactly, are you seeing? i'm actually going BACK to 2.4.2 cause i miss my real time graphs... heck, i've been almost too busy to post here. i'm sure ya'll have missed me ;) ----- Original Message ----- From: Josh Luthman To: af@afmug.com Sent: Saturday, July 11, 2015 5:26 PM Subject: Re: [AFMUG] Cambium ePMP1000 Software Ver 2.4.3 Sorry/welcome :( Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jul 11, 2015 6:06 PM, "Wireless Admin" <wirel...@htn.net> wrote: Damn, I was hoping I was not the only one. Steve b. ---------------------------------------------------------------------------- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Wireless Admin Sent: Saturday, July 11, 2015 10:34 AM To: af@afmug.com Subject: [AFMUG] Cambium ePMP1000 Software Ver 2.4.3 I just wanted to see how others were doing with the latest Software release (2.4.3) for the ePMP platform. The first tower (2.4Ghz) we installed it on developed problems almost right away. Links that were stable with 2.4.2 became unreliable. We rolled the software back and forth several times to see if there was just some new interference but the results seem conclusive. Links that are fine with 2.4.2 are not fine with 2.4.3. We tried loading 2.4.3 on only the AP's and not on the SM's and still had issues. We also tried 2.4.3 on the SM's and not the AP's but still no stability. I realize we're special here but REALLY. Is it possible that I'm the only one with issues... Steve B.