It usually gets over 100 degrees here every year... it also gets -20. ;-)
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com ----- Original Message ----- From: "Jaime Solorza" <losguyswirel...@gmail.com> To: "Animal Farm" <af@afmug.com> Sent: Friday, August 21, 2015 9:26:18 AM Subject: Re: [AFMUG] More SCADA stuff Yes they do.. They will be covered when we finish all the wiring and stuff. But rare for these to freeze. These wells are in Tornillo Texas where it was 101 yesterday. Still need to install more sensors but after their electricians check their lines. Our surge protector indicated a spike. Wiring looks right but we don't know how it looks inside box. Really old stuff in rooms On Aug 21, 2015 8:17 AM, "Chuck McCown" < ch...@wbmfg.com > wrote: I presume those quarter inch galvanized lines to the gauges have water in them... (was also assuming that it will never get that cold there) From: Jaime Solorza Sent: Friday, August 21, 2015 8:15 AM To: Animal Farm Subject: Re: [AFMUG] More SCADA stuff We have over 30 installed and no issues. What's going to freeze and break? On Aug 21, 2015 5:15 AM, "Gino Villarini" < ginovi...@gmail.com > wrote: <blockquote> toughswitch? bro make yourself a favor and move to Netonix On Fri, Aug 21, 2015 at 12:37 AM, George Skorup < geo...@cbcast.com > wrote: <blockquote> I missed that. And stop reading my mind! I had to rape and bastardize some of the duct from the rackmount.com kits and I want to replace it. I thought I found the right stuff from Phoenix, but it's wider than taller, exactly the opposite. Stupid me. Now I have 2 meters of it. And the fingers break off easily. I hate it. I'm also switching to aluminum rail. Easier to cut and doesn't rust. On 8/20/2015 11:30 PM, Ken Hohhof wrote: <blockquote> In his photo, the cover says IBOCO. http://www.iboco.com/ I have some from Panduit that looks identical. I actually think the Panduit stuff is too well made though, the fingers aren't bendy enough, and the cover is too hard to get off. I actually like the cable management duct that comes with these: http://www.rackmount.com/Rackacc2/Racks-Cabinet/RCB1122.htm I'll have to check if there's a brand name on it, maybe it's Jaime's IBOCO stuff. -----Original Message----- From: George Skorup Sent: Thursday, August 20, 2015 11:09 PM To: af@afmug.com Subject: Re: [AFMUG] More SCADA stuff Jaime, I've been looking for exactly that size wire duct. Who makes it? I'm guessing Phoenix? What's the model/product number? On 8/20/2015 9:22 PM, Jaime Solorza wrote: <blockquote> DC for Toughswitch </blockquote> </blockquote> </blockquote> </blockquote>