Loss = 20 log (cos Θ) Plug in 45 degrees and see what you get.
From: Eric Rogers Sent: Saturday, August 22, 2015 12:32 PM To: af@afmug.com Subject: Re: [AFMUG] Epmp and omni I thought you kept 70% of your signal, or decreased by 30%, not 50%... Eric Rogers www.pdsconnect.me (317) 831-3000 x200 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Daniel White Sent: Friday, August 21, 2015 8:35 PM To: af@afmug.com Subject: Re: [AFMUG] Epmp and omni If you mix slant with linear polarization you should lose 3dB per chain. Thank you, Daniel White afmu...@gmail.com Cell: +1 (303) 746-3590 Skype: danieldwhite Social: LinkedIn: Twitter From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mathew Howard Sent: Friday, August 21, 2015 6:07 PM To: af <af@afmug.com> Subject: Re: [AFMUG] Epmp and omni They should work fine with an H/V omni, the Cambium 2.4ghz sectors are slant, but the integrated SMs are actually H/V - it works fine to mix slant and linear with ePMP. That said, KP does make a dual slant 2.4ghz omni. On Fri, Aug 21, 2015 at 6:46 PM, Josh Corson <j...@bluebitnetworks.com> wrote: Has anyone came across a good 2.4GHz omni for ePMP. As I remember they are dual slant radios and thus not a standard omni like a 2.4 ubiquiti will work. Correct me if I'm wrong. We are using rocket M2's with omnis now for small small sites and would be nice to get that gig port and higher capacity on 2.4 omni. On Fri, Aug 21, 2015 at 5:01 PM Mathew Howard <mhoward...@gmail.com> wrote: We've got a several of them deployed, I've used Chuck's antennas and UBNT antennas. They work as anything else with an omni. On Fri, Aug 21, 2015 at 4:40 PM, Josh Luthman <j...@imaginenetworksllc.com> wrote: Any deployments? Certified? I knew there was an antenna to use already :) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 21, 2015 5:22 PM, <ch...@wbmfg.com> wrote: Like this? http://www.mccowntech.com/products.cfm?PID=78&Cat= From: Josh Luthman Sent: Friday, August 21, 2015 3:19 PM To: af@afmug.com Subject: [AFMUG] Epmp and omni Is this doable? Anyone doing it? Certified or no? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -------------------------------------------------------------------------------- This email has been checked for viruses by Avast antivirus software. www.avast.com
