PPPoE on the SM or on the customer equipment? If on the SM, I'm pretty
sure this has been brought up quite a few times going back quite a
while. I know others have mentioned that SM registration auth via RADIUS
is giving similar issues. Well, at least the session stuck in a state
where the SM is unmanageable or something like that.
I'm not doing PPPoE or RADIUS for SM auth, but I am considering going to
NAT in the SM w/ DMZ now that the NAT speed has been greatly improved
with 13.2+. I really wanted 13.4 loaded up first so I can create a
config template so the guys don't have to get too involved with setting
everything up in every single SM multiple times per day. I hope to test
this up on a site once they get 13.4.1 builds in our hands.
I bet Aaron is sooo happy to be back on the list. :)
On 9/9/2015 6:52 PM, Wireless Administrator wrote:
Just to do pppoe auth.
Steve
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *George Skorup
*Sent:* Wednesday, September 09, 2015 7:44 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] 13.4 Firmware on PMP100
Are you running RADIUS?
On 9/9/2015 6:22 PM, Wireless Administrator wrote:
I have two open tickets that I need to work on with Cambium.
�
�SM�s hang � Not passing customer data and no response on Wan
side.� Power on reset required.
�Installers unable to access the SM in NAT mode from the Ethernet
side.� Responds to ping but not telnet or browser.� If you
catch it within seconds of post completion you can get in with
browser.
�
Anyone else having issues?� I need to provide Cambium the
details they requested to move forward with problem determination.
�
Steve B.
�
