Hi George, We do not have CRC error counts today and we would have to investigate this. I will take this as a feature request.
Dan From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup Sent: Tuesday, September 29, 2015 10:53 AM To: af@afmug.com Subject: Re: [AFMUG] Link Status Dan, Can the hardware give CRC error counts? That would be nice to have in the GUI. It's very helpful on Canopy. On 9/29/2015 8:09 AM, Dan Sullivan wrote: Hi SmarterBroadband, � Today ePMP does not provide a �count� for how many times the ethernet link has gone up and down. � We do provide a trap every time an up or a down event happens via RFC1213. � Dan ePMP Software Manager � From: Af [mailto:af-boun...@afmug.com] On Behalf Of SmarterBroadband Sent: Monday, September 28, 2015 7:09 PM To: af@afmug.com<mailto:af@afmug.com> Subject: [AFMUG] Link Status � Is there anywhere in an ePMP or Mikrotik to see a Ethernet Link count.� i.e. how many time it has gone up and down �count� like in a Canopy unit. � I keep getting a ether1 link down and then link up in my Tik log (which causes an OSPF neighbor state change), but both radio and tik show no Ethernet errors so I cannot see if it is a port issue at one end.