Makes sense.
On 11/3/2015 3:44 PM, Chuck McCown wrote:
Depends on the size of the heliax. The larger stuff has a tube as
center conductor. In any event just calculate the cross sectional
area of the copper of the center conductor and you can compare that
with a wire gauge chart.
*From:* Adam Moffett <mailto:dmmoff...@gmail.com>
*Sent:* Tuesday, November 03, 2015 1:08 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] using heliax for DC power up tower?
For equivalent wire gauge would you just compare the center conductor
diameter to a wire gauge chart?
On 11/2/2015 6:51 PM, Chuck McCown wrote:
It is pretty easy to insert and remove power from a coax that also
has RF on it too. Just a choke coil and capacitor at both ends. If
you want details give me the frequency and what kind of power and I
will design it for you.
*From:* Jaime Solorza <mailto:losguyswirel...@gmail.com>
*Sent:* Monday, November 02, 2015 4:49 PM
*To:* Animal Farm <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] using heliax for DC power up tower?
Yep .we used. LMR 400 to power custom made receive amps for WMux
radios we modified long time ago.
Jaime Solorza
On Nov 2, 2015 3:51 PM, "Chuck McCown" <ch...@wbmfg.com
<mailto:ch...@wbmfg.com>> wrote:
Just make sure if you hook it up to 120 VAC main current you
don’t put the hot wire on the outer conductor of the coax...
*From:* Ty Featherling <mailto:tyfeatherl...@gmail.com>
*Sent:* Monday, November 02, 2015 3:43 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] using heliax for DC power up tower?
Thanks all, great solution Josh!
-Ty
-Ty
On Mon, Nov 2, 2015 at 4:38 PM, Chuck McCown <ch...@wbmfg.com> wrote:
You can run DC /or/ AC over it.
Think of it this way, 1000 watt ham radio puts 223 volts AC
(at RF frequencies) on the coax and everything is just fine.
All CATV systems put 60 or 90 volts AC on the line to power
the amps.
*From:* Ty Featherling <mailto:tyfeatherl...@gmail.com>
*Sent:* Monday, November 02, 2015 2:09 PM
*To:* af@afmug.com
*Subject:* [AFMUG] using heliax for DC power up tower?
Any reason I couldn't use 1/4" heliax I already have in place
up a tower to run power to a POE switch?
This is the stuff:
https://www.tessco.com/products/displayProductInfo.do?sku=469162
-Ty