Oh, ok, that's even better!
-----Original Message----- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Brian Sullivan Sent: Sunday, December 27, 2015 5:50 PM To: af@afmug.com Subject: Re: [AFMUG] Airfiber 24 HD The latest firmware for the AF series (all models) now calculates the expected signal level it's on the Main screen of the GUI as "Ideal". It uses the GPS data to calculate FSL and assumes clear LOS. On 12/26/2015 11:46 AM, Sterling Jacobson wrote: > Ok, cool. > > -----Original Message----- > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chris Herrington > Sent: Saturday, December 26, 2015 10:34 AM > To: af@afmug.com > Subject: Re: [AFMUG] Airfiber 24 HD > > Little late response > > http://wisptools.net/tools-linkbudget.php works really well, just > remember it uses EIRP as transmit power with 0 dBm transmit power > > RX = 38 gain, TX = 33 gain > > Chris Herrington, PMP, RCDD/OSP&WD Specialist FCC Lic. # PG-11-19440 > > Full Spectrum Communications > Consulting, Engineering, Installation > Communications & Electrical Contractor #450317 US Mail: PO Box 60905 > Irvine CA 92602 Visit us at: 14701 Myford Road, Suite B Tustin, CA > 92780 800-897-7287, 714-897-3789 Chris Cell 714-309-8714 ch...@fsc.com > http://www.fsc.com > > > > > -----Original Message----- > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sterling Jacobson > Sent: Thursday, October 29, 2015 3:00 PM > To: 'af@afmug.com' > Subject: [AFMUG] Airfiber 24 HD > > Is there a good link estimation utility for the Airfiber 24 HD? > > I like the UBNT online link calculator, but it doesn't work with 24Ghz? > > This is the link I just put up, shouldn't the chains all be about equal dB? > What does it mean when the second chain is so much different from the first > on these units? > > Don't even know if the dB is dialed in at this range :( >
