Sadly, it's only a single channel, although this would be great for verifying correct receiver performance. Not so great for simulating the gps constellation. On Feb 4, 2016 3:30 PM, "Jon Auer" <j...@tapodi.net> wrote:
> Wow. That's actually affordable. On to hijacking drones! I mean... testing > radio timing in our well shielded test room :) > > On Thu, Feb 4, 2016 at 4:01 PM, Chuck McCown <ch...@wbmfg.com> wrote: > >> >> http://www.ebay.com/itm/Spirent-GSS6100-GPS-Signal-Simulator-Calibrated-23-Oct-2015-30-Day-Warranty/172024671227?_trksid=p2141725.c100338.m3726&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20150313114020%26meid%3D4b46d7f2e77944be96ecc6bcd88c84c8%26pid%3D100338%26rk%3D8%26rkt%3D17%26sd%3D331764301867 >> >> *From:* Jon Auer <j...@tapodi.net> >> *Sent:* Thursday, February 04, 2016 2:58 PM >> *To:* Animal Farm <af@afmug.com> >> *Subject:* Re: [AFMUG] GPS Repeaters >> >> Yeah, I'd think such a thing would be incompatible with GPS since the >> repeating would add delay and GPS works on differences in delay. >> >> For indoors, if you need GPS signal for something but it doesn't have to >> be "real" there are GPS test sets / satellite simulators. Last time I >> looked they were crazy expensive. Unless you are testing gear or hijacking >> drones* I'm not sure why someone would want one. >> * A famous example was Iran using fake GPS signals to trick a US spy >> drone into landing at one of their airports. >> >> On Thu, Feb 4, 2016 at 3:33 PM, TJ Trout <t...@voltbb.com> wrote: >> >>> No such thing, I think. Probably a localized gps signal for tractors, >>> which isn't a gps repeater >>> >>> On Thu, Feb 4, 2016 at 1:12 PM, Jaime Solorza <losguyswirel...@gmail.com >>> > wrote: >>> >>>> Hello Gents: >>>> Any of you blokes ever install a GPS repeater system for commercial use? >>>> >>>> I got a call from my cousin who is an engineer in Chihuahua and is >>>> flying down here to look a project using these. I told him the install >>>> part is pretty straight forward, much like a DAS or OTA cell repeater >>>> design but I know in USA you need a license. Not sure about Cd. Juarez or >>>> Chihuahua, Mexico requirements. >>>> Any feedback appreciated. muchas garcias en minifaldas >>>> Jaime Solorza >>>> Wireless Systems Architect >>>> 915-861-1390 >>>> >>> >>> >> >> > >