Hmm, Tessco has Andrew at $138, house brand at $118, not sure why so expensive.
Of course the shipping adds a lot unless you buy a bunch at once shipped
freight on a pallet.
From: Lewis Bergman
Sent: Thursday, March 10, 2016 6:48 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
You guys kill me. Chuck makes a great mount for less money.
On Thu, Mar 10, 2016, 6:31 PM Kurt Fankhauser <lists.wavel...@gmail.com> wrote:
i thought i was paying somewhere in the $150 range for it
On Thu, Mar 10, 2016 at 7:16 PM, Chuck McCown <ch...@wbmfg.com> wrote:
What do you pay for an Andrew/Comscope S200?
From: Ken Hohhof
Sent: Thursday, March 10, 2016 1:25 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
How much standoff do you need? I have used Andrew S200 like George says (2
ft standoff) or S300 (3 ft), actually they go up to 6 ft standoff. Or
Connect-It Wireless S2-S6. Can be used on vertical or sloping tower legs.
Sitepro1 also has several solutions, some of which are YUGE!
From: Jason McKemie
Sent: Thursday, March 10, 2016 2:02 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
I had looked at those, I just didn't know if it had enough standoff for use
with an omni - from a shadowing perspective.
On Thursday, March 10, 2016, Chuck McCown <ch...@wbmfg.com> wrote:
Here is a good ‘un:
http://www.mccowntech.com/24-inch-pipe-standoff/
From: Jason McKemie
Sent: Thursday, March 10, 2016 12:00 PM
To: javascript:_e(%7B%7D,'cvml','af@afmug.com');
Subject: [AFMUG] 5GHz Omni standoff
Anyone have suggestions for a standoff mount for use with a 5GHz omni?
It will be mounted to the side of a Pirod tower, so I'm going to need some sort
of standoff to minimize shadowing.
-Jason
