Yeah, I saw that one. It get's you ~10" of depth on the inside. The CCR is ~7.5" in depth (according to the specs). This leaves a LITTLE bit of room, but you also have to consider any copper/fiber connections on the router taking up more depth. It may work, though.
On Wed, Mar 23, 2016 at 1:38 PM, Bill Prince <[email protected]> wrote: > How deep do you need? Adalet does have a deep-door version that makes the > cabinet 2" deeper. > > Like this: > http://www.enclosurehub.com/productcart/pc/viewPrd.asp?idproduct=13622&idcategory=961 > > bp > <part15sbs{at}gmail{dot}com> > > > On 3/23/2016 10:31 AM, Josh Baird wrote: > >> So - I'm looking for a reasonable NEMA enclosure that is deep enough to >> either rackmount or DIN mount some rather deep equipment (CCR >> 1009-8G-1S-1S+-PC and Netonix WS-12-250-DC). >> >> I have been using the Adalet fiberglass enclosures, but the largest one >> is 22x17x8, and 8" just doesn't cut it for this stuff. To get around this, >> I have been "wall mounting" the switch/router on the back of the >> enclosure's sub-plate, but I can't waste that much space in the enclosure >> any longer. >> >> I would prefer to just find a NEMA that is large enough (and not crazy >> expensive) that I can rack/DIN rail mount in versus using a big-ass >> rackmount/19" enclosure. If I find an enclosure that is deep enough, I >> think I can figure out how to rig a rack for 1-2U of stuff in it. >> >> Josh >> > >
